Yes, you can turn on additional room lights when a D2MSD Wi-Fi Motion Sensing Dimmer detects motion, and turn off additional room lights when the room is not occupied. Please note that the Motion Sensing Dimmer must be set to occupancy mode.
Tap the room name that contains the Motion Sensing Dimmer, then select Room Response.
Tap the Room Response toggle to enable the feature.
The primary motion sensor will be listed. (If there are more than one Motion Sensing Dimmers in the room that are set to Occupancy Mode, they will all appear. You will need to choose which one will be the primary Motion Sensing Dimmer that will be used to control additional lights).
Then chose the lights that should be controlled by the Motion Sensing Dimmer.